Analisis penentuan LBS sebagai upaya melokalisir daerah gangguan di penyulang Pandan Landung ULP Kebonagung PT. PLN (Persero) UP3 Malang

Main Article Content

Rohmanita Duanaputri Awan Setiawan Rhezal Agung Ananto

Abstract

Penyulang Pandan Landung merupakan penyulang dengan sistem radial. Dengan sistem radial ini, saat terjadi gangguan dapat diminimalisir dengan penempatan LBS, sedangkan untuk manuver dengan penyulang lain perlu diperhatikan dahulu beban yang dapat ditampung oleh penyulang lain dan jarak lokasi tersebut untuk manuver. Dengan melihat data gangguan yang ada saat ini, penelitian ini bertujuan untuk menganalisis penempatan LBS dalam hal melokalisir atau mempersempit daerah padam. Alternatif penempatan LBS baru dibutuhkan untuk mengurangi daerah padam. Penempatan LBS baru di Penyulang Pandan Landung yakni pada lokasi sebelum trafo R1116. LBS ini memanuver dari Penyulang Pandan Landung ke Penyulang Klayatan sehingga dapat meminimalisir daerah padam pada penyulang Pandan Landung


Pandan Landung feeder is a feeder with a radial system. With this radial system, disruption can be minimized by placing LBS, while for maneuvering with other feeders, it is necessary to pay attention to the load that can be accommodated by other feeders and the distance of these locations for maneuvers. By looking at the current disturbance data, this study aims to analyze the placement of the LBS in terms of localizing or narrowing down the blackout areas. An alternative to placing new LBS is needed to reduce blackout areas. The placement of the new LBS at Pandan Landung Feeder is at the location before transformer R1116. This LBS maneuvers from the Pandan Landung feeder to the Klayatan feeder so as to minimize the area of outages in the Pandan Landung feeder. The energy lost before the maneuver is 26987.4 kWh, while when there is a maneuver the value becomes 12647.18, it can be seen that there is a decrease in the value of energy lost by 53.14%.

Downloads

Download data is not yet available.

Article Details

How to Cite
DUANAPUTRI, Rohmanita; SETIAWAN, Awan; ANANTO, Rhezal Agung. Analisis penentuan LBS sebagai upaya melokalisir daerah gangguan di penyulang Pandan Landung ULP Kebonagung PT. PLN (Persero) UP3 Malang. JURNAL ELTEK, [S.l.], v. 18, n. 2, p. 68-76, oct. 2020. ISSN 2355-0740. Available at: <https://jraam.polinema.ac.id/index.php/eltek/article/view/248>. Date accessed: 28 sep. 2021. doi: https://doi.org/10.33795/eltek.v18i2.248.
Section
Articles

References

[1] I. K. Hery Samudra, I. G. Dyana Arjana, dan I. W. Artha Wijaya, “Studi Peningkatan Kualitas Pelayanan Penyulang Menggunakan Load Break Switch(LBS) Three Way”, Teknologi Elektro, Vol. 15, No. 1, Januari-Juni 2016 ISSN 1693 – 2951S.
[2] H. K. Tupan dan R. N. Nurhasanah, “Optimasi Penempatan Load Break Switch (LBS) pada Penyulang Karpan 2 Ambon menggunakan Metode Algoritma Genetika”, Jurnal EECCIS Vol 11, No. 1, April 2017
[3] Anonim, 1. (2010). Kriteria Disain Enjinering Konstruksi Jaringan Distribusi Tenaga Listrik. Jakarta: PT. PLN Persero.
[4] Donny Fisca Efisiyanto, M. F. (2014). Pengoperasian dan Pemeliharaan Load Break Switch ENTEC Pada SUTM 20 KV. 2-10.
[5] S, Nina, at all, “Comparison of Different Air Flow Concepts for a Medium Voltage Load Break Switch”, IEEE Transactions on Power Delivery, Volume: 35, Issue: 2, April 2020.
[6] S, Nina, at all, “Empirical Relationships Between Air-Load Break Switch Parameters and Interrupting Performance”, IEEE Transactions on Power Delivery, Volume: 31, Issue: 1, Feb. 2016.
[7] S, Nina, at all, “Air-Flow Investigation for a Medium-Voltage Load Break Switch”, IEEE Transactions on Power Delivery, Volume: 30, Issue: 1, Feb. 2015.
[8] Priamabodo, NW, at all. Case Study of Medium Voltage Load Break Switch Failure in Indonesia. 2018 3rd International Conference on Information Technology, Information System and Electrical Engineering (ICITISEE)
[9] E. Fjeld, W. Rondeel, and M. Saxegaard, “Temperature Rise in a Load Break Switch,” in 2016 IEEE 62nd Holm Conference on Electrical Contacts (Holm), 2016, pp. 49–54.
[10] P. C. Jabs, K. Niayesh and N. S. Støa-Aanensen, "Short-Circuit Making of Medium Voltage Load Break Switches Using a Grid Connected Test Circuit," 2018 IEEE International Conference on High Voltage Engineering and Application (ICHVE), ATHENS, Greece, 2018, pp. 1-4.
[11] A. Islam, D. Birtwhistle and T. K. Saha, "Synthetic testing of medium voltage load break switches," 2014 Australasian Universities Power Engineering Conference (AUPEC), Perth, WA, 2014, pp. 1-5.
[12] Laporan PT. PLN Rayon Kebonagung
[13] Das. D, “Electrical Power System”, New Age International Publishers, 2006.